Aug 31 2013
Web Site : http://www.effecta.se
eMail : email@example.com
Telephone : +46 0300 223 20
Address : Västra Rågdalsvägen 21 , Kungsbacka , none , Sweden , 434 96
Effecta is a manufacturer of wood and pellet boilers, pellet burners and buffer tanks for the domestic use and also for larger buildings up to 60 kW output. Products has long periods between service and high efficiency.
Effecta Energy Solutions AB has been developing, manufacturing and supplying specialist biomass and solar energy products for the domestic and small scale heating market for more than 30 years.
During this time we have gained the knowledge and experience necessary to produce reliable, innovative, high-end "Renewable, Low and Zero Carbon Technologies" and their associated controls and control systems.
Most of our products have been and continue to be developed "in-house", and all final assembly is carried out at our own factory in Sweden to ensure absolute control of output quality.
The product line is now
• pellet boilers complete
• pellet burners
• wood log boilers, 25, 35, 60 kW also possible to attach pellet burner for combined use
• ackumulator tanks
EFFECTA KOMPLETT II - A FULLY AUTOMATIC PELLET BOILER
The Effecta Komplett II is our flagship in the range of pellets products. It has a built-in coil for instantaneous domestic hot water, an automatic shunt control system with weather compensation, an electric back-up heater and a front mounted, user friendly controller with digital display.
Effecta Supra pellet burner
The Effecta Supra is a burner with automatic cleaning. The tube type of burner has been available in the market since the early 90s. It is without doubt the most tested and used type of burner throughout Europe it´s simplicity is striking and also the realibility of operation. There has only been one big downside to this type of burner; the cleaning interval. Until a few years ago the burner needed cleaning on a weekly basis during heating season. With Effectas automatic cleaning system AERO this is history. After each running cycle the burner is cleaned by compressed air from the onboard compressor which results in a cleaning interval of 3 tons.